How Much Does Festool Tool Repair Cost? (CT & Sanders)
Realistic ranges, what drives price, and when diagnostics save money. Diagnostic fee: $79.99 (labor only) — applied to your repair if approved; parts billed separately.
🔧 Book Diagnostics — $79.99📞 Call 214-994-8121
TL;DR: Most repairs fall into: pads/consumables (lower), bearings/brakes (mid), and electronics/boards (higher). Our $79.99 diagnostic prevents guessing, and that fee is credited toward the repair if you approve the work. Parts are billed as needed.
Pricing policy: Diagnostics $79.99 (labor only). If you approve the repair, we apply the diagnostic fee to that repair. If you decline, you only pay the diagnostic. Parts and additional labor are quoted after diagnostics.
Typical Sander Repair Ranges
| Issue | What it Usually Involves | Typical Range* |
|---|---|---|
| 🛞 Pad / Brake Wear | Pad replacement, brake ring, inspection | $65-$125 |
| 🔩 Bearings / Vibration | Bearings, shafts/hubs, re-balance, test | $125–$150 |
| ⚡ Speed Control / Electronics | Speed module/board checks & replacement | $140–$320+ |
| 🧹 Dust Flow Issues | Seals/ports alignment, pad holes match | $70–$150 |
Models: RO 150 / RO 125 / ETS 125 / ETS EC 150/125 / DTS 400 / DTSC 400, etc.
Typical CT (Dust Extractor) Ranges
| Issue | What it Usually Involves | Typical Range* |
|---|---|---|
| 🌬️ Weak Suction | Bag/filter/HEPA, lid gasket, port seals | $65–$150 |
| 🔌 No Power / Intermittent | Plug-It/power lead, switch, socket testing | $45–$180 |
| 🧠 Auto/Tool Mode Fault | Board logic & selector tests, socket | $120–$280+ |
| 🗜️ Motor/Brush Wear (where applicable) | Motor checks, brushes, noise/heat tests | $140–$320+ |
Models: CT-15 / CT-Mini / CT-Midi / CT-22 / CT-26 / CT-36 / CT-48.
*Ranges reflect typical outcomes we see after diagnostics. Final pricing depends on exact parts and labor. We don’t perform manufacturer-warranty repairs; use the official process if covered.
What Drives Cost Up or Down
- 🔧 Parts & availability — pads/seals are inexpensive; boards/modules can be premium.
- 🕒 Labor time — seized fasteners, heavy dust ingress, or multiple failures increase time.
- 🧩 Root cause vs. symptom — a worn brake may mask bearing issues; diagnostics catch both.
- 🧪 Testing scope — RPM checks, airflow measurements, and safety tests prevent callbacks.
- 📦 Ship-in vs. drop-off — shipping adds packaging/insurance; local drop-off avoids that.